logo

Hangzhou Ocean Industry Co.,Ltd.

Reliable quality, Professional service, Continuous improving to meet your needs

Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home News

35MnB Boron Steel Quenching & Tempering: Why Just a Few Grams of Boron Per Ton Enables 10.9 High-Strength Bolts

Certification
Good quality Gear Racks for sales
Good quality Gear Racks for sales
I am very satisfied with the services. Happy to create long term business relationship with your company.

—— Ashley Scott---USA

Thanks for the good quality, good design with reasonable price

—— Anna Diop---United Kingdom

I'm Online Chat Now
Company News
35MnB Boron Steel Quenching & Tempering: Why Just a Few Grams of Boron Per Ton Enables 10.9 High-Strength Bolts

35MnB may sound unremarkable to outsiders, yet seasoned heat treatment specialists recognize it as a highly efficient microalloyed steel. As a medium-carbon steel, it relies on a tiny boron addition to deliver outstanding performance for high-strength bolt applications.

Grade Overview

35MnB is a premium boron-containing structural steel specified under GB/T 3077. There is no direct equivalent grade in ASTM or JIS standards. American boron steels such as 15B35 and 50B44 follow a different carbon design route and cannot be treated as matching alternatives; 35MnB is a characteristic boron steel developed under Chinese national standards.

Three core chemical composition ranges should be noted:

  • Carbon: 0.32~0.39%
  • Manganese: 1.10~1.40%
  • Boron: 0.0005~0.0035%

Boron stands out despite its extremely low content. Only several grams to tens of grams of boron are added per ton of steel, yet this minor element generates dramatic property improvements.

Working Mechanism: How Trace Boron Works

Boron atoms are small in size. During austenitization before quenching, boron segregates and occupies grain boundaries. Grain boundaries are the preferred nucleation sites for soft phases including ferrite and pearlite. Once grain boundaries are pinned and blocked by boron atoms, soft phase formation is suppressed, and martensite can form readily upon quenching. This is the core mechanism for remarkable hardenability improvement.

Manganese itself also boosts hardenability. Manganese provides a baseline hardenability, while trace boron delivers a powerful supplementary effect. Combined, the hardenability of 35MnB can reach the level of expensive Ni-Cr alloy steels at a much lower material cost. It is widely regarded as a cost-effective high-strength steel grade.

Critical Limitations: Three Major Enemies of Boron

Boron delivers strong benefits but is highly sensitive to processing conditions. Three risk factors can render boron ineffective:

  1. Susceptible to Nitrogen Nitrogen readily reacts with boron to form boron nitride, which eliminates boron’s hardenability contribution. Titanium and aluminum are added during steelmaking to fix free nitrogen and protect active boron.
  2. Susceptible to Excessive Temperature Overhigh austenitizing temperature causes excessive boron segregation at grain boundaries and grain coarsening, which degrades performance. Quenching temperature must be tightly controlled instead of simply raised.
  3. Prone to Temper Embrittlement Both manganese and boron aggravate reversible temper embrittlement (second-kind temper embrittlement). The cooling procedure after tempering becomes a decisive control point.

Tempering Process Windows & Applications

表格

Tempering Type Temperature Holding & Cooling Hardness Typical Application
Low-temperature tempering 180~250℃ 4 h HRC ≥55 Track pads, block teeth, wear-resistant parts
Medium-temperature tempering 300~400℃ 3 h, oil quenching after discharge — Avoid temper embrittlement zone
High-temperature tempering 500~550℃ 2 h, air cooling HRC 34~40 10.9 grade fasteners

Standard quenching condition: 840~860℃, 60 min holding, water or oil quenching. Higher hardness can be obtained by adjusting temperature up to 890~900℃. This is the upper limit. Further temperature rise or prolonged holding will trigger grain coarsening and boron failure, reducing hardenability instead.

Tempering Cooling: A Common Failure Source

Many quality defects of 35MnB components originate from improper cooling after tempering. For medium-temperature tempering at 300~400℃, oil cooling immediately after furnace discharge is required to rapidly cross the embrittlement temperature range.

High-temperature tempering at 500~550℃ falls right inside the sensitive interval of reversible temper embrittlement. Air cooling works for small-section bolts with moderate toughness requirements. For thick-section workpieces and parts with strict toughness requirements, accelerated cooling via oil or water is recommended to avoid embrittlement.

Slow cooling inside the furnace after high-temperature tempering will sharply reduce impact toughness and lead to brittle fracture, an issue especially prominent in Mn-B bearing steels.

Application Scope & Typical Pitfalls

✅ Suitable applications:

  • 10.9 grade high-strength bolts (high-temperature tempering at 500~550℃, HRC 34~40, tensile strength ≥1040 MPa)
  • Track components, tooth blocks (low-temperature tempering, HRC 55+, high wear resistance)

❌ Must avoid these improper operations:

  • Overheating above 900℃ with extended holding: boron segregation failure + grain coarsening, reduced hardenability
  • Missing Ti/Al nitrogen fixation during smelting: boron consumed by nitrogen, no hardenability gain
  • Slow cooling after medium or high-temperature tempering: severe temper embrittlement and deteriorated impact property

Core Takeaway

Trace boron improves hardenability by segregating at grain boundaries and suppressing soft phase nucleation. Manganese builds basic hardenability while boron amplifies the effect. Three rules for boron control: protect boron from nitrogen with Ti/Al, strictly limit austenitizing temperature, and adopt fast cooling after tempering to avoid temper embrittlement.

Pub Time : 2026-11-17 10:28:00 >> News list
Contact Details
Hangzhou Ocean Industry Co.,Ltd

Contact Person: Mrs. Lily Mao

Tel: 008613588811830

Fax: 86-571-88844378

Send your inquiry directly to us (0 / 3000)